Wednesday, October 2, 2013

Get Prepared!

As a way of preparation and research we thought we would take a few field trips.  First we went to Huntsville EMA and learned what happens when we have a disaster or city wide emergency.  





They had a room with a big map of the city.  There were cubicles for every department in the city.  We discussed April 27th and what they did.  We told them of our solution to helping people during a disaster (which we haven't said what it is) and they were intrigued with it.  They said when we finish it they would like to see what we came up with.  We have such a long way to go...

Next we visited the National Weather Service here in Huntsville.  We talked with David Nadler who was terrific with the group.  You could tell he really liked his job.  We told him of the fun we had making a tornado simulator.  He gave us a tour and talked about the radar images.  Then we got to see their tornado simulator that they use for educational purposes.  It was so cool. 




All in all, we had a lot of fun and learned a great deal.  Thank you Huntsville EMA and Eric Nadler from the Huntsville office of the National Weather Service for the tours you gave our group. 

Wednesday, September 18, 2013

The Tornado of Destruction!!!



I have to laugh at the enthusiasm for the project and then solemnly remember when I hear my son say, "The Tornado of Destruction!!!".


Here we are testing out our Tornado Simulator after we had tweaked it a bit to get a better vortex.  It is an upside down Tornado.  I am not sure how to make it form right side up.  Any suggestions?  We used dry ice and two fans attached to batteries.

Alabama has Tornadoes all year long but the season peaks in March/April and October/November. 

My son and I were in the activity center of this church having social skills lessons during this tornado.  The picture made the news.  It was taken by Ryan Crim.  It was before the April 27th Tornadoes and was taken in January of 2010.  We were not meeting as a robotics group then thankfully.  Come to think of it...most of the children that are in our robotics group were at the same social skills lesson.  I am glad that none of the kids saw how close it was.  What would happen if that spire was hit???


We do have to be careful when discussing Tornadoes.  Most of the kids in my group went through the April 27th Tornadoes, which were much much much worse.

It was hard to keep track of where they were popping up on the radar screen on TV because there were so many on that day.  Then in the evening all the power went out.  It was almost a week before it was restored.  I remember how hard it was to find out information afterwards.

Luckily at home I had prepared beforehand and had an emergency kit.  I had a Coleman oven, stove and fuel for pizzas.  My son is a selective eater, something that is common in the autism community.  There were few things he would eat and pizza is one of them.  I think that was my biggest worry.  What were we going to get him to eat.

There was a few things we hadn't thought of preparing beforehand like having enough gas in our car.  We did not go anywhere as a result.  We also did not have a generator or a grill even though I had made up for it by the Coleman stove.  A friend of ours was able to locate a generator for us a few days after.  I used all the food in the upright freezer to keep the fridge cold.  Most people took theirs out and had a large cookout.

One major problem we did have was we needed to keep yogurt cold. That was because it was the only way my son at the time would take any medicine.  We learned a lot during that time.  Every one here has a story.

Thankfully we all survived, but what we went through that day always comes to mind when the Tornado sirens go off.  Others in Alabama were not as fortunate as we were.  They will be forever in our hearts, minds and prayers.  We dedicate this post to them.




A Disaster....

We had our first disaster...well sort of.  We found a website where we could practice skills at helping people during a Natural Disaster.  The goal is to save as many people as you can while keeping the town protected.

Here is a link to the game...  

Stop Disaster Game





During our next team meeting we kind of got off subject by having to put out some fires.  Although firenados are interesting that is not what our project is about.  



We are going to have to have a Social Skill Lesson next time about appropriate behavior and Core Values.  We had gone over that, but a couple kids were probably not there during that meeting.  All goes with the territory of having kids on the spectrum.  Let's see what creative ways I can do this.  Got any suggestions?

We had a new member start who will be a big asset to our team.  His Mom drives him all the way from Birmingham so he can attend.  He has been looking for a team with kids who he fits in with.  I am glad we are here.  

We talked about what we were going to link our QR codes to.  We all drew graphs and ideas about what we want our informational website to be about.  Next meeting I am going over the suggestions and combine them all.  Here was an example I showed on our Facebook page of what could be possible.  We are not going to use this.  It seems when you show the kids an example of what you are talking about they instantly relate.  


Next post I will tell you about the field trip we took.  


Thursday, September 12, 2013

Thank You!

I would like to say "Thank You!!!" to a couple of our supporters from Piggybackr.  

Grandpa Orv - who was a Science Teacher for a lot of kids and knows the importance of STEM (Science/Technology/Engineering/Math).

The Reardon Family - who are friends of ours from Orchestra and whom like Dr. Who also.  

Teri Nelson - who was our first violin teacher and an inspiration as a teacher to those with special needs.

Lisa Wiggins - our current violin teacher who believes in this team. 

Jean Murray - Jakob and Camryn's Grandmother

Also a big Thank You to the  ANONYMOUS  persons who have also contributed.  We appreciate the support.

Peggy Stevens - a friend from the Autism community.


                                      




Wednesday, September 11, 2013

Piggybackr and EV3

We have started a fundraiser for all those interested in supporting us for another year.  

 

Please check out this link.

Piggybackr

Here is what we would like to do with the funds:  

Buy a one or two EV3's for the kids to use....

The new EV3 robotics Kit has come out.  I hope we will not be at a disadvantage if we don't have one.  In this kit you can use 4 motors instead of three.  That means you have one more motor for attachments.  
The NXTstep blog talks all about it. 



I did order the new caster ball attachment.  My son loves the functionality of the caster ball.  The other part shown here is a smaller turntable that I ordered.  There is a larger version of it in the Lego NXT resource kit.





 









You can order the Ev3 Education Core Set for $339.95.  The expansion kit is 99.95.  With a whole new system you will have to buy a software license $99.95 and a new battery charger $59.95 with a plug to charge it $24.95.  I don't know if you can charge it with your existing chargers.  The total comes out to $624.75.  That does not include shipping.


Okay is it worth it...let's see.  Here is what ToyBrickStation says:




Also we will need Registration Fees for next year's season.

Registration Fees:

$225.00

Field Set Up Kit:

$75.00

Local Registration:

around $60.00

T-Shirts:

$150 - $200

Last year I had to order a minimum so I ended up paying for 4 extra shirts.

Grant money does not cover all the expenses like shirts and trades at the qualifier.  It does not pay for the meeting cost or the presentation materials.  I am the kind of person if I am going to do something worth while I am going to do it right.










Saturday, August 24, 2013

Let's get to work at having fun...

I am always nervous before that first meeting.  I want all the kids to be actively engaged and having fun.  I try to prepare the week before the meeting.  My son likes to help when he can.

Our first meeting we got to know each other, explained what the FLL was all about, and filled out registration forms.  Then all we had time for was learning about this years challenge.  We played a game called "Triage" to learn about how to help people during disasters.  The board is divided into hexagons.  As we play and take turns we go through the natural course of a day in a disaster.  As the day ramps up the disaster gets bigger.  Our job is to save as many people as we can by getting them to the safe zone.




During our second meeting we did some brainstorming about our teams name.  We came up with 

QR Coders which stands for Quick Response Coders.  We had an idea that we could use a QR Code kind of like the familiar 911 to help us with our solution.  We want to help people during, before and after a Tornado disaster.  We chose Tornadoes to focus on because they are prevalent here in Alabama.  We had just gone through the April 27th tornadoes a couple of years ago and wanted to help others know what to do in similar situations.  We decided our project would be to create a website that was informational yet fun.  

After brainstorming we got to work learning to program.  We were able to get a NXT to do a move block test.  The kids figured out they could turn the NXTs and spin around.  

Our third meeting I had a surprise I had been working on to show the kids.  We (son and I) built a tornado simulator using dry ice.  We used the epilogue laser cutter down at MindGear Labs to cut out the parts.  We then glued the parts together and powered our creation by small fans and a battery pack.  We put dry ice in a container and pored hot water over it.  Then we set the tornado simulator on top and turned it on.  Here was the result.  


After this the kids worked on programming and building missions.

We were building those missions the next couple of meetings.  There are 10 of them and they seemed to take forever.  Of course I could have built them at home but what would be the fun in that.  The challenge comes out soon so we wanted to be prepared.







Gearing up for a new season....

We are gearing up for a new season.  This year we are...


Team 2364







Publix has graciously offered to host our team this year again.









Rocket City RoboSkills will be starting again soon.  We are a parent led First Lego League Robotics Group.  We have a few openings (limit of 10 kids for a team) for middle school aged kids with Aspergers. Publix at Piedmont Square has graciously offered to let us meet there again this year on Fridays from 4-6 pm. 


We are currently signing up for new participants.  Please contact Coach Lowder if you are interested.

Tuesday, June 25, 2013

The 2012 FLL Qualifier at Hampton Cove...



The big day has arrived...

All in all, we did FABULOUS!  

Here were our scores.



Let me interpret...we were 16th place out of 24 teams.  That means we were doing something right!!!

122 was our team number.  133, 115 and 120 were our robot rounds.  133 was our best  robot score.

Of course there are always areas that we could have done better....every team looks back and says that.  For the first year I think we flew with flying colors.  The kids were worn out when it was all said and done and so was I.  I was very proud of all that they accomplished!!!

Here were a couple pictures we took.  





We had our own celebration at Mellow Mushroom.  We gave out trophies for this years participation.




Each kid got their own trophy.  


Zachary received the Rising Star Award for his role in the Stop Animation and Skit.

Ethan received the Most Fexible Award which is the coveted Social Skill's award.  He was also very flexible and creative in writing the script for our skit and stop animation movie.

Douglas received the Inovative Solution Award for his role in figuring out the colored sensors to do a mission when no-one could figure them out.

Lydia received the Most Creative Award for the Dalek she drew for the t-shirt.  She was also very helpful putting everything together weekly.
Michael received Gracious Professional Award for helping others learn sacrificing his own time to work on the robot missions.

Caleb received the Inspiration Award for his inspired project.  He also received the Most Valuable Team Member Award for his example to everyone.  He always tried hard, worked on everything, and tried to be a positive example to everyone.

until next season...



Monday, October 22, 2012

The Doctor is Coming...

The Doctor is Coming...

 



We knew we needed to come up with a skit for our presentation.  To make it fun we decided none other than A Dr. Who theme will do, since Dr. Who is a senior too.  

One of our kids, Ethan had been playing around with stop animation videos.  We used this app
to create the video.


Stop Motion Studio App
                                                                









The skit was about Dr. Who coming to help another senior, who was a Weeping Angel,  with his arthritis.  We had a lot of fun creating it.  

Next we created our team spirit hats.






Each kid created there own hat from a pattern.  Then they decorated it.  Pretty good, huh?

Next we all drew pictures to vote on for the t-shirt.  This is the one we chose drawn by Lydia...





On the back we put this picture...





Here is what the shirts looked like...







We also made Sonic Screwdrivers.  
In our video Dr. Who cured the Weeping Angel with a Sonic Screwdriver.







After that we visited Maker's Local 256.  We had a personal tour.  
Here is some of the photos we took while there.











We got to meet our favorite Robot.  We learned what went on in the shop.  







We finished our NXT Robot with the inspiration of going to see a real one.







And did test runs of the missions.  

I was real impressed with how Douglas learned how to use the color sensors on the NXT to figure out how to differentiate between the different colored medicine bottles.  






Caleb worked on the solution project with his Grandfather.  We each had a role.


His project helped seniors lift up their legs so they would not have to bend over so far.

Meanwhile, we decided that with the help of Jennifer Paulsen from Makers Local 256 we should practice doing a skit in front of the judges and use the video presentation at our table.  



Next, we went to a assisted living home where we demonstrated our missions and project.  
Caleb had been working on the project.  The senior citizens gave us some valuable input.  







We worked on the Tri-Fold and included this picture...






Here is how it turned out...



The Tardis in the picture spun around with a motor.


Zachary and Ethan's Grandmother come talk to us about Arthritis.  A Professor visited our group to talk about the cognitive effects of aging.  Last but not least Laura Parks from Task came out and did a demonstration on assistive technology and what seniors might need.  She had some interesting gadgets.  We put a few of the examples on our table by our tri-fold.


Some highlights we unfortunately did not get a picture of was when Michael bowled a strike the first time when attempting the bowling mission.  



Michael also helped Challenger Middle's Team by bringing his mission board and missions to them when theirs had not yet arrived.  He also helped them brainstorm some solutions.



We learned that you should always read the instructions when putting together the mission board.  We could not figure out why we didn't have enough dual-lock pieces.  It finally dawned on us.

and last but not least...




I have a tendency not to do this as a coach. 


Sunday, October 21, 2012

The Table

Okay, I said I would post about how I made a portable FLL table.  Before I do, let me tell you how I came up with the idea.

Problem:  I needed a portable table that would fit in a Mini-Cooper.  I have to transport the table back and forth once a week (loading and unloading) to where our FLL team meets.

Research: I looked online at tables some others teams had built (styro-foam borders and board), but nothing seemed practical for what I needed.  They looked like they would get broken too easy and were quite expensive.  I got to brainstorming.

Solution:  Here is what I came up with for the off season.  After the fact I had built this, I saw another team had used some foam mats with wooden borders.  That would have made life a little bit easier if I had found those instructions previously than figuring it out on my own.  I always have to do everything the hard way.



All you need to do is put it together and put a mat on top and you are good to go.  The mat featured here was from the Power Puzzles season.  It was given to us by the local middle school.  What I liked about it was the puzzle pieces.  You usually associate puzzle pieces with Autism, so it was perfect.  Asperger's Syndrome is on the Autism Spectrum.



 As you can see we do not have the Lego Pieces for the mat.  We kind of created our own missions which were very basic.  We did one mission per kid to give them a sense of accomplishment.

Here is how I made it.

What you need:

Play mats from Sam's Club.
Foam pipe insulators from Home Depot or Lowe's 
Edge already on mat

Cost around $30 total





First you need to put 8 squares together with the side pieces attached laying flat.  Then you flip it over to the grey side.  Number each piece and draw a diagram on grey side for kids to be able to put together themselves. 






I also labeled the side foam pieces so they would know how to put them on the foam table.  They were labeled B for Bottom, S for Side.  I had to distinguish which side they were , left or right.  So "BL" would go on the bottom left side, and "2S" would be on the second mat, side piece.  It took the kids a few times to master it.  Labeling is very important because you want to put it together the same way every time.  If the kids ask why something doesn't line up I will ask them if they followed the diagram.





Then you flip all the side pieces of the foam table so they are perpendicular.  Here is what I mean...


Here is another example looking from another direction. I made sure I locked the edge by pushing it in as shown in the bottom picture.



After that, you cut the foam inserts to the size of each individual square.  At first I left the pieces long on the sides, but It was a pain to carry.  To get them to fit in a bag I ended up making them the same size as the foam side pieces.


Then after I had turned all the sides up, I put the foam insulators over the side pieces.  You can wrap them to fit over the whole side piece or you can just lay them on top of the side piece.






The foam insulators go around the whole outside edge.  This will keep your robot within the confines of the table.  You can set this up on a table with legs or on the floor.

After I put the foam insulators on, I laid down the Puzzle Power mat and put Velcro between the mat and the foam table.  If you don't put the table squares together the same way the Velcro won't line up. 

Here is the finished table before adding the Power Puzzle mat!



another picture...





There you go...a portable table that doesn't weigh much and can be transported in a Mini-Cooper.  I do not know how this would work in a Smart car.





My regular season mat has the wooden boards assembled together with corner brackets and straight metal pieces for the middle sides.  I also used an extra piece of wood to stabilize the middle sections.

I drew a diagram on the foam table to let the kids know how to put together the wooden boards.  Each side and middle has a baggie full of wing-nuts and screws labeled.  The corner brackets are labeled too.

This can also be transported in my Mini-Cooper.  The only problem since I added the boards is, I can't fit my kid in the car.  Oh well, you can't have everything! :)